It's a direct starter with electromechanical switching, rated 5 A at AC-3 400 V — that's the motor-load current it handles under full starting duty, not just resistive heating.
Integration into a panel or line
This unit mounts on a vertical surface with ±180° rotation possible and can tilt forward/backward ±22.5° — useful for tight enclosures where you need to angle the display or cable entry. The IP55 rating means it's dust-protected and handles water jets, so it's suited for washdown areas or outdoor cabinets where splash is a concern. It communicates over AS-Interface (the protocol is supported), not PROFINET or PROFIBUS DP, so verify your network master is AS-i capable.
Supply and control voltage
The control supply voltage is 20.4 to 26.4 V DC — that's the 24 V DC nominal range with tolerance. The main circuit operating voltage is 340 to 440 V AC, 50/60 Hz, covering 400 V line supplies. The 5 A AC-3 rating is the key figure for motor sizing: it's the current at 400 V under the heaviest switching category, so match it to your motor's full-load amps.