What this reversing starter nails for the cure recipe
The bimetal design is electromechanical, not electronic, so it holds up to the steam and vibration of industrial environments without firmware glitches. Rated for a 340–440 V operating voltage at 50/60 Hz. The control supply is 20.4–26.4 V DC.
Mounting and environment — rated for press temperatures
IP55 protection means the enclosure resists dust and water jets — suitable for washdown areas or outdoor cabinets, though not submerged. The ambient temperature range of -25 to +35 °C covers most control rooms and unheated plant floors, but derate above 35 °C if the panel sits near a curing press or oven. This lets you fit it into tight enclosures or angled subpanels without worrying about orientation limits. The short-circuit protection is designed for circuit-breakers, not fuses, so coordinate with a suitable motor-protective circuit-breaker upstream. No PROFIBUS, PROFINET, or AS-Interface onboard — this is a hardwired I/O-controlled unit, not a networked fieldbus device.