Skip to main content
Siemens 3RN1011-2BG00

Siemens 3RN1011-2BG00 Thermistor Motor Protection, 110 V AC

MPN 3RN1011-2BG00

Siemens SIRIUS 3RN1 thermistor motor protection evaluation unit, 3RN1011-2BG00, 110 V AC 50/60 Hz, IP20, spring-loaded terminals, 22.5 mm width.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RN1011-2BG00 specifications
ParameterValue
IP ratingIP20
Mountingscrew and snap-on mounting
Temp operating max60 °C
Temp operating min-25 °C
Depth91 mm
Width22.5 mm
Height103 mm

Product details

The Siemens 3RN1011-2BG00 is a thermistor motor protection evaluation unit from the SIRUS 3RN1 series. It monitors motor winding temperature via PTC thermistors and trips the contactor on over-temperature, providing a reclosing lockout function so the motor cannot restart until the fault is manually reset.

The 110 V AC supply voltage is the operating coil voltage — confirm your control circuit matches. The unit accepts 50 Hz or 60 Hz without adjustment. The 22.5 mm width matches standard DIN-rail component spacing, so it occupies one modular slot in a panel. The unit provides two changeover (CO) auxiliary contacts for status feedback. No normally-open or normally-closed dedicated contacts are present — the two CO contacts handle both signalling and lockout indication.

The 3RN1011-2BG00 is a phased-out product. The manufacturer's preferred successor is the 3RN2011-2BW30, a thermistor motor protection standard evaluation unit with manual/remote reset and 2 W consumption at 110 V AC. For new designs or BOM lines that cannot accept the successor, the 3RN1011-2BG00 is sourced through our surplus and last-time-buy channels.

The 91 mm depth fits standard 100 mm deep enclosures. Spring-loaded terminals accept solid or ferruled conductors; strip length 8 mm. No auxiliary power supply needed — the unit is self-powered from the 110 V AC control circuit.

MPN
3RN1011-2BG00