Siemens SIRIUS time-delay relay, 3RP1560-1SP30, 200-240 V AC 50/60 Hz, adjustable delay 1-20 s, 5 A thermal current, screw and snap-on mounting on 35 mm DIN rail.
| Parameter | Value |
|---|---|
| Product designation | timing relay |
| Parameter | Value |
|---|---|
| ON-delay | No |
| OFF-delay | No |
| Delayed switching | 0 |
| At 24 V | 1 A |
| Influence of ambient temperature | ±5 % |
| Parameter | Value |
|---|---|
| Control supply voltage type (AC/DC) | AC/DC |
| At 50 Hz | 200 ... 240 V |
| At 60 Hz | 200 ... 240 V |
| Rated surge voltage withstand | 4 000 V |
| Initial value | 0.85 |
| Full-scale value | 1.1 |
| Parameter | Value |
|---|---|
| At 250 V | 0.1 A |
| At 125 V | 0.2 A |
| Parameter | Value |
|---|---|
| Operating temperature range | -25 ... +60 °C |
| Storage temperature range | -40 ... +85 °C |
| Transport temperature range | -40 ... +85 °C |
| Operating humidity range | 10 ... 95 % |
| IP protection rating | IP20 |
| Pollution degree | 3 |
| Max. installation altitude | 2 000 m |
| Shock resistance (IEC 60068-2-27) | 11g / 15 ms |
| Vibration resistance (IEC 60068-2-6) | 10 ... 55 Hz / 0.35 mm |
| ESD immunity (IEC 61000-4-2) | 4 kV contact discharge / 8 kV air discharge |
| Burst immunity (IEC 61000-4-4) | 2 kV network connection / 1 kV control connection |
| Parameter | Value |
|---|---|
| Fastening method | screw and snap-on mounting onto 35 mm DIN rail |
| Mounting position | any |
| Removable terminals | Yes |
| Width | 22.5 mm |
| Height | 102 mm |
| Depth | 91 mm |
| Wire range, solid (AWG) | 20 ... 14 |
| Wire range, stranded (AWG) | 20 ... 14 |
| Wire range, finely stranded w/ ferrule (mm²) | 0.5 ... 2.5 mm² |
| Clearance, rear | 0 mm |
| Clearance, front | 0 mm |
| Clearance, sides | 0 mm |
| Clearance, top | 0 mm |
| Clearance, bottom | 0 mm |
The Siemens 3RP1560-1SP30 is a SIRIUS time-delay relay with an adjustable on-delay range of 1 to 20 seconds, powered by 200-240 V AC at 50 or 60 Hz. Its thermal current rating is 5 A, and the relay output switches loads up to 1 A at 24 V, 0.2 A at 125 V, or 0.1 A at 250 V.
Snap it onto 35 mm DIN rail — no tools needed for the rail mount, but the screw terminals need a torque of 0.8 to 1.2 N·m for solid or stranded wire from 20 to 14 AWG.
This part is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time.
The depth is 91 mm, with zero clearance required upwards, forwards, backwards, downwards, or at the side.
The screw terminals accept solid or stranded wire from 20 AWG to 14 AWG.
No related articles