That 10 A figure is the maximum continuous current for the main contacts in AC-12 duty (resistive loads at 24 V). For motor switching, the relevant rating is 3.5 kW at 500 V and 4 kW at 690 V — those are the values that govern whether this contactor handles a given pump, conveyor, or compressor motor. The S00 frame keeps the width to 45 mm, so it fits a standard DIN-rail panel without crowding adjacent devices.
Termination and wiring — spring-loaded main contacts
Main current circuit uses spring-loaded terminals, accepting 2x (0.25... 2.5 mm²) solid or stranded conductors (2x AWG 24... 14). The spring-cage design speeds panel wiring — no torque driver needed, just strip to 8–10 mm and push in. The control circuit terminals are also IP20 finger-safe, same as the front face. Type 1 coordination allows a 35 A gL/gG fuse. This matters when the panel is designed to a specific SCCR — the fuse choice directly affects the branch-circuit rating.
Environmental and mounting limits
Pollution degree 3 (conductive pollution, typical for industrial control panels). The contactor is rated for 30 million mechanical operations typical — a figure that governs maintenance intervals in high-cycle applications like shuttle cranes or pick-and-place cells.