Skip to main content
Log in
Siemens 3RT1015-2AP02-ZW98 — Contactors

Siemens 3RT1015-2AP02-ZW98 SIRIUS Power Contactor, S00, 3 kW

MPN3RT1015-2AP02-ZW98

Siemens SIRIUS 3RT1015-2AP02-ZW98 power contactor, size S00, 3 kW at AC-2 400 V, spring-loaded terminals, screw and snap-on mounting on 35 mm DIN rail.

Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

3RT1015-2AP02-ZW98 — Identification
ParameterValue
Contactor frame sizeS00
3RT1015-2AP02-ZW98 — Ratings & Performance
ParameterValue
Rated operational current, AC-4 @ 400 V6.5 A
Rated value @ 400 V3 A
Rated value @ 500 V3.5 kW
Rated value @ 690 V4 kW
Rated value @ 230 V6 A
Rated value @ 24 V10 A
Rated value @ 60 V2 A
Rated value @ 110 V1 A
Rated value @ 220 V0.3 A
3RT1015-2AP02-ZW98 — Control & Coil
ParameterValue
Control supply voltage typeAC
Rated value @ 50 Hz0.8 ... 1.1
Rated value @ 50 Hz230 V
3RT1015-2AP02-ZW98 — Contacts & Poles
ParameterValue
Main poles3
Main NO contacts3
Auxiliary contact reliability1 faulty switching per 100 million (17 V, 1 mA)
3RT1015-2AP02-ZW98 — Protection & Coordination
ParameterValue
Short-circuit coordination type 1, fusefuse gL/gG: 35 A
Short-circuit coordination type 2, fusefuse gL/gG: 20 A
Aux. switch short-circuit protection, fusefuse gL/gG: 10 A
3RT1015-2AP02-ZW98 — Connection & Mounting
ParameterValue
Main circuit connectionspring-loaded terminals
Conductor cross-section, solid2x (0.25 ... 2.5 mm²)
Conductor cross-section, finely stranded w/ ferrule2x (0.25 ... 1.5 mm²)
Side-by-side mountingYes
3RT1015-2AP02-ZW98 — Durability
ParameterValue
Durability (operating cycles, typ.)30 000 000
Durability with aux. switch block (cycles, typ.)10 000 000
3RT1015-2AP02-ZW98 — Environmental
ParameterValue
Operating temperature range-25 ... +60 °C
3RT1015-2AP02-ZW98 — Mechanical
ParameterValue
Width45 mm
Height60 mm
Depth73 mm

Product details

Termination is via spring-loaded terminals for the main current circuit, accepting 2x (0.25... 2.5 mm²) solid or stranded wire. Front face carries IP20 protection.

Clearance to grounded metal at the side is 6 mm. For Type 1 coordination (the contactor may need replacement after fault), a 35 A gL/gG fuse is allowed.

The AC-2 rating of 3 kW at 400 V is the motor-switching figure that matters for slip-ring motor applications. AC-4 at 400 V is rated at 6.5 A — for plugging or inching duty. The AC-12 maximum operating current is 10 A, covering resistive loads. Auxiliary contact ratings span 24 V (10 A) down to 220 V (0.3 A) and 230 V (6 A), covering a wide range of control voltages. Mechanical endurance is typical at 30 million operating cycles — a figure that reflects the contactor's design life under normal switching conditions, not the electrical endurance under load.

Frequently asked questions

What is the closest functional alternative — the 3RT1016-2AP02?

The 3RT1016-2AP02 is a larger frame size (S0 vs S00) and carries higher current ratings. It will not drop into a panel wired for the S00 without rewiring the power circuit and checking the DIN-rail footprint. Use the 3RT1016 only if you need the higher rating and can accommodate the larger physical size.

What wire sizes does the spring-loaded terminal accept?

Main current circuit terminals accept 2x (0.25... 2.5 mm²) solid or stranded conductors, or 2x (24... 14) AWG.

What compliance documentation is available for this part?

As a standard Siemens SIRIUS catalogue item, the 3RT1015-2AP02-ZW98 typically carries CE, UL, CSA, and CCC approvals, with RoHS and REACH compliance declarations available from the manufacturer. Specific certification markings should be confirmed on the nameplate or via the product documentation bundle.

MPN
3RT1015-2AP02-ZW98