Rated for AC-3 duty at 4.5 kW on 500 V and 5.5 kW on 690 V, this contactor handles typical three-phase induction motor loads up to those power levels.
The 45 mm width and 72 mm depth keep this S00 contactor slim for high-density panel layouts. Side-by-side mounting is permitted. Coil rated for 50 Hz and 60 Hz at 24 V. Operating range is 0.8 to 1.1 times rated voltage at 50 Hz and 0.85 to 1.1 at 60 Hz. Screw-type terminals on the main circuit accept solid conductors from 0.5 to 4 mm² (2x 0.75 to 4 mm² max), with AWG equivalents from 20 to 12. The auxiliary contact block handles 10 A at 24 V, 6 A at 230 V, and 3 A at 400 V — enough for pilot duty or PLC input signaling. Front and terminal protection is IP20, so it's touch-safe but not washdown-rated.
For Type 1 coordination (contactor may need replacement after a fault), the fuse rating goes up to 35 A gL/gG. This matters when you're designing a motor branch circuit to a specific SCCR target.