Skip to main content
Log in
Siemens 3RT1016-1BB41-ZW98 — Contactors

Siemens SIRIUS 3RT1016-1BB41-ZW98 Power Contactor, 24 VDC, 1

MPN3RT1016-1BB41-ZW98

Siemens SIRIUS power contactor, size S00, 3RT1016-1BB41-ZW98, 24 VDC coil, 10 A rated at 24 V, screw terminals, snap-on DIN rail mount.

Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

3RT1016-1BB41-ZW98 — Identification
ParameterValue
Contactor frame sizeS00
3RT1016-1BB41-ZW98 — Ratings & Performance
ParameterValue
Rated operational current, AC-4 @ 400 V8.5 A
Rated value @ 400 V3 A
Rated value @ 500 V4.5 kW
Rated value @ 690 V5.5 kW
Rated value @ 230 V6 A
Rated value @ 24 V10 A
Rated value @ 60 V2 A
Rated value @ 110 V1 A
Rated value @ 220 V0.3 A
3RT1016-1BB41-ZW98 — Control & Coil
ParameterValue
Control supply voltage typeDC
3RT1016-1BB41-ZW98 — Contacts & Poles
ParameterValue
Main poles3
Main NO contacts3
Auxiliary contact reliability1 faulty switching per 100 million (17 V, 1 mA)
3RT1016-1BB41-ZW98 — Protection & Coordination
ParameterValue
Short-circuit coordination type 1, fusefuse gL/gG: 35 A
Short-circuit coordination type 2, fusefuse gL/gG: 20 A
Aux. switch short-circuit protection, fusefuse gL/gG: 10 A
3RT1016-1BB41-ZW98 — Connection & Mounting
ParameterValue
Main circuit connectionscrew-type terminals
Conductor cross-section, solid2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²), max. 2x (0.75 ... 4 mm²)
Conductor cross-section, finely stranded w/ ferrule2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²)
Side-by-side mountingYes
3RT1016-1BB41-ZW98 — Durability
ParameterValue
Durability (operating cycles, typ.)30 000 000
Durability with aux. switch block (cycles, typ.)10 000 000
3RT1016-1BB41-ZW98 — Environmental
ParameterValue
Operating temperature range-25 ... +60 °C
3RT1016-1BB41-ZW98 — Mechanical
ParameterValue
Width45 mm
Height57.5 mm
Depth72 mm

Product details

The Siemens SIRIUS 3RT1016-1BB41-ZW98 is a size S00 power contactor with a 24 VDC coil, rated for 10 A at 24 V and 5.5 kW at 690 V.

The AC-4 rating at 400 V is 8.5 A — that's the switching current for reversing or inching duty, which is the tougher thermal cycle than AC-3. For standard motor start/run (AC-3), the 400 V rating is 4 kW. The 10 A at 24 V rating covers low-voltage DC loads, like PLC outputs or signal lamps.

Width is 45 mm, height 57.5 mm, depth 72 mm. The screw terminals accept 2x (0.5 to 1.5 mm²) solid, 2x (0.75 to 2.5 mm²) stranded, or max 2x (0.75 to 4 mm²) — also AWG 2x (20-16), 2x (18-14), 1x 12 for the main contacts.

Frequently asked questions

What is the closest functional second-source to the 3RT1016-1BB41-ZW98?

The 3RT1015-1BB42 is a close functional peer within the same SIRIUS S00 family. The key difference is the coil voltage: the 3RT1015-1BB42 uses a 24 VAC/DC coil, while the 3RT1016-1BB41-ZW98 is 24 VDC only. Both share the same footprint, terminal layout, and DIN rail mounting, so a panel swap without rewiring is possible if the coil supply matches.

What is the depth of the 3RT1016-1BB41-ZW98?

The depth is 72 mm.

What wire sizes does the 3RT1016-1BB41-ZW98 accept?

The screw terminals accept 2x (0.5 to 1.5 mm²) solid, 2x (0.75 to 2.5 mm²) stranded, or max 2x (0.75 to 4 mm²). AWG equivalents are 2x (20-16), 2x (18-14), and 1x 12 for the main contacts.

Will the 3RT1016-1BB41-ZW98 drop into a panel specified around the 3RT1015-1BB42 without rewiring?

Yes, if the coil supply is 24 VDC. Both are size S00 with the same 45 mm width, 57.5 mm height, 72 mm depth, and screw terminal layout on DIN rail. The 3RT1015-1BB42 accepts both 24 VAC and DC, while the 3RT1016-1BB41-ZW98 is DC-only, so verify the control voltage before swapping.

What compliance documentation does Siemens provide for the 3RT1016-1BB41-ZW98?

As a standard Siemens SIRIUS product, it carries CE marking for the European market and is designed to meet IEC/EN 60947-4-1 standards for contactors. UL and CSA approvals are typical for the base 3RT10 series, but specific certification for the -ZW98 variant should be confirmed from the nameplate or Siemens documentation.

MPN
3RT1016-1BB41-ZW98