That simplifies the DC supply sizing in the panel: budget 3.3 W continuous per contactor.
Rated at 10 A for AC-12 duty (resistive loads) and 8.5 A for AC-4 duty (plugging/inching of motors) at 400 V, this contactor handles frequent switching of motor loads up to 4.5 kW at 500 V and 5.5 kW at 690 V. The auxiliary contact ratings cover 10 A at 24 V, 6 A at 230 V, and 3 A at 400 V, so the same contactor can switch both the motor power and a control signal without a separate auxiliary block for many applications.
Wiring and mounting details
Screw-type terminals on the main circuit accept 2x (0.5 to 1.5 mm²), 2x (0.75 to 2.5 mm²), or up to 2x (0.75 to 4 mm²) — or AWG equivalents 2x (20 to 16), 2x (18 to 14), and 1x 12. That covers most panel wiring from signal-level up to 4 mm² power feeds. Dimensions are 45 mm wide, 57.5 mm high, and 72 mm deep — the S00 footprint. Front protection is IP20, which means finger-safe but not sealed against dust or water — standard for inside a cabinet.
For a BOM line that needs this exact order code, the fit is confirmed by the frame size S00, 24 VDC coil, and screw terminals. The AC-3 and AC-4 ratings above let you verify it matches your motor load without guessing.