The coil accepts 24 V at both 50 Hz and 60 Hz, with a pick-up range of 0.85–1.1 × rated voltage at 60 Hz and 0.8–1.1 at 50 Hz. Spring-loaded terminals for the main circuit accept 2× (0.25–2.5 mm²) solid or stranded copper, which saves panel wiring time compared to screw-clamp variants.
Auxiliary contact ratings: 10 A at 24 V, 6 A at 230 V, and 3 A at 400 V — these govern what the auxiliary block can switch for PLC inputs or pilot lights.
The front and terminal enclosure carry IP20 finger-safe protection, so the contactor can sit in an open panel section without additional shrouding.