It mounts via screw and snap-on onto 35 mm standard mounting rail per DIN EN 50022, fitting a 45 mm wide DIN-rail footprint with 60 mm height and 73 mm depth — compact enough for dense panel layouts where every millimeter of rail space counts. The 24 VDC coil draws its rated current at the listed 10 A operating current (AC-12 maximum), with a pickup voltage range of 0.8 to 1.1 at 50 Hz and 0.85 to 1.1 at 60 Hz. Spring-loaded terminals on the main current circuit accept 2x (0.25 to 2.5 mm²) solid or stranded conductors, or 2x (24 to 14) AWG — no tools needed for termination, which speeds panel wiring and reduces torque-verification steps during commissioning.
The IP20 finger-safe protection on the front and terminals means it can be installed in a standard IP54 or higher enclosure without additional shrouding for the operator-facing side.
Switching capacity and coordination
Rated for AC-2 duty at 400 V at 4 kW and AC-4 at 400 V at 8.5 A, this contactor handles reversing or inching applications where the load is switched under full motor current.