Siemens SIRIUS power contactor, size S00, 3RT1017-2AH02, 5.5 kW at 400 V AC-2, 45 mm wide, spring-loaded terminals, DIN EN 50022 snap-on mounting.
| Parameter | Value |
|---|---|
| Contactor frame size | S00 |
| Parameter | Value |
|---|---|
| Rated operational current, AC-4 @ 400 V | 8.5 A |
| Rated value @ 400 V | 3 A |
| Rated value @ 500 V | 5.5 kW |
| Rated value @ 690 V | 5.5 kW |
| Rated value @ 230 V | 6 A |
| Rated value @ 24 V | 10 A |
| Rated value @ 60 V | 2 A |
| Rated value @ 110 V | 1 A |
| Rated value @ 220 V | 0.3 A |
| Parameter | Value |
|---|---|
| Control supply voltage type | AC |
| Rated value @ 50 Hz | 0.8 ... 1.1 |
| Rated value @ 50 Hz | 48 V |
| Parameter | Value |
|---|---|
| Main poles | 3 |
| Main NO contacts | 3 |
| Auxiliary contact reliability | 1 faulty switching per 100 million (17 V, 1 mA) |
| Parameter | Value |
|---|---|
| Short-circuit coordination type 1, fuse | fuse gL/gG: 35 A |
| Short-circuit coordination type 2, fuse | fuse gL/gG: 20 A |
| Aux. switch short-circuit protection, fuse | fuse gL/gG: 10 A |
| Parameter | Value |
|---|---|
| Main circuit connection | spring-loaded terminals |
| Conductor cross-section, solid | 2x (0.25 ... 2.5 mm²) |
| Conductor cross-section, finely stranded w/ ferrule | 2x (0.25 ... 1.5 mm²) |
| Side-by-side mounting | Yes |
| Parameter | Value |
|---|---|
| Durability (operating cycles, typ.) | 30 000 000 |
| Durability with aux. switch block (cycles, typ.) | 10 000 000 |
| Parameter | Value |
|---|---|
| Operating temperature range | -25 ... +60 °C |
| Parameter | Value |
|---|---|
| Width | 45 mm |
| Height | 60 mm |
| Depth | 73 mm |
Depth is 73 mm, height 60 mm — check enclosure clearance before wiring, especially if using deep terminal shrouds.
In AC-4 (plugging/reversing) at 400 V it handles 8.5 A. For DC switching at 24 V it's rated 10 A, dropping to 0.3 A at 220 V DC. The main circuit uses spring-loaded terminals accepting 2x (0.25 to 2.5 mm²) solid or stranded, or 2x (24 to 14 AWG).
Pollution degree 3 rating suits industrial environments with conductive contamination.
Width 45 mm, height 60 mm, depth 73 mm. It mounts on 35 mm DIN rail per DIN EN 50022 via screw or snap-on.
The main circuit terminals accept 2x (0.25 to 2.5 mm²) solid or stranded, or 2x (24 to 14 AWG).
For type 2 coordination (no damage to the contactor), use a gL/gG 20 A fuse upstream. Type 1 coordination allows 35 A gL/gG.
No related articles