Skip to main content
Log in
Siemens 3RT1017-2AP01 — Contactors

Siemens 3RT1017-2AP01 SIRIUS Power Contactor, S00, 5.5 kW at

MPN3RT1017-2AP01

Siemens SIRIUS S00 power contactor, 3RT1017-2AP01, 5.5 kW at 400 V AC-2, spring-loaded terminals, 45 mm width, screw and snap-on DIN rail mounting.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

3RT1017-2AP01 — Identification
ParameterValue
Contactor frame sizeS00
3RT1017-2AP01 — Ratings & Performance
ParameterValue
Rated operational current, AC-4 @ 400 V8.5 A
Rated value @ 400 V3 A
Rated value @ 500 V5.5 kW
Rated value @ 690 V5.5 kW
Rated value @ 230 V6 A
Rated value @ 24 V10 A
Rated value @ 60 V2 A
Rated value @ 110 V1 A
Rated value @ 220 V0.3 A
3RT1017-2AP01 — Control & Coil
ParameterValue
Control supply voltage typeAC
Rated value @ 50 Hz0.8 ... 1.1
Rated value @ 50 Hz230 V
3RT1017-2AP01 — Contacts & Poles
ParameterValue
Main poles3
Main NO contacts3
Auxiliary contact reliability1 faulty switching per 100 million (17 V, 1 mA)
3RT1017-2AP01 — Protection & Coordination
ParameterValue
Short-circuit coordination type 1, fusefuse gL/gG: 35 A
Short-circuit coordination type 2, fusefuse gL/gG: 20 A
Aux. switch short-circuit protection, fusefuse gL/gG: 10 A
3RT1017-2AP01 — Connection & Mounting
ParameterValue
Main circuit connectionspring-loaded terminals
Conductor cross-section, solid2x (0.25 ... 2.5 mm²)
Conductor cross-section, finely stranded w/ ferrule2x (0.25 ... 1.5 mm²)
Side-by-side mountingYes
3RT1017-2AP01 — Durability
ParameterValue
Durability (operating cycles, typ.)30 000 000
Durability with aux. switch block (cycles, typ.)10 000 000
3RT1017-2AP01 — Environmental
ParameterValue
Operating temperature range-25 ... +60 °C
3RT1017-2AP01 — Mechanical
ParameterValue
Width45 mm
Height60 mm
Depth73 mm

Product details

Integrator Note — SIRIUS S00 Power Contactor 3RT1017-2AP01

The Siemens 3RT1017-2AP01 is a SIRIUS-branded power contactor in the S00 frame size, rated for motor switching up to 5.5 kW at 400 V in AC-2 duty (slip-ring motors, moderate overloads). The main current circuit uses spring-loaded terminals accepting 2x (0.25 to 2.5 mm²) solid or stranded conductors (24 to 14 AWG), which eliminates routine screw-torque checks during commissioning.

Coordination & Protection Planning

These values govern the upstream protective device selection for audit-trail compliance.

Environmental & Installation Constraints

The contactor is rated IP20 on the front and at the terminals — finger-safe but not protected against moisture ingress, so it requires enclosure in a suitable cabinet for washdown or outdoor locations.

Coil & Auxiliary Contact Data

The coil operates at 50/60 Hz with a voltage tolerance of 0.8 to 1.1 at 50 Hz and 0.85 to 1.1 at 60 Hz. One instantaneous auxiliary contact is integrated — a normally open (NO) configuration per the standard S00 auxiliary block layout. Switching capacity for the auxiliary contact: 10 A at 24 V, 6 A at 230 V, 2 A at 60 V, 1 A at 110 V, 0.3 A at 220 V, and 3 A at 400 V. These values cover typical PLC input and relay interface loads.

Frequently asked questions

What is the closest functional alternative to 3RT1017-2AP01?

The 3RT1016-1AG61 is a functional peer in the same S00 frame size, but it uses screw-type terminals instead of spring-loaded. The 3RT1017-2AP01's spring-loaded terminals reduce wiring time and eliminate screw-torque verification. Both share the same 45 mm width and DIN-rail mounting footprint, so panel cut-outs and busbar layouts are interchangeable.

Where can I buy 3RT1017-2AP01 and get current pricing?

This part is sourced to order against an RFQ through independent distribution channels. Availability and current pricing are confirmed at quote time — submit an RFQ for a firm commercial response.

What compliance documentation is available for 3RT1017-2AP01?

As a Siemens SIRIUS product, the 3RT1017-2AP01 is manufactured under IEC/EN 60947-4-1 standards. The manufacturer provides a declaration of conformity covering the Low Voltage Directive and applicable harmonized standards. Specific RoHS and REACH compliance statements are included in the product documentation package available on request.

Will 3RT1017-2AP01 drop into a panel specified for 3RT1016-1AG61?

Yes — both are S00 frame size, 45 mm wide, and mount on 35 mm DIN rail per EN 50022. The physical footprint and busbar connection points are identical. The only difference is the terminal type: spring-loaded on 3RT1017-2AP01 versus screw-type on 3RT1016-1AG61, so no rewiring of the main circuit is required.

MPN
3RT1017-2AP01