It carries three main NO contacts and one auxiliary contact block with 2 contacts (NO/NC configurable per the block). The coil is rated for 230 V at 60 Hz, with an operating range of 0.8 to 1.1 times the rated voltage at that frequency. For motor duty, it is rated at 7.5 kW for AC-2 use at 400 V (slip-ring motors, wound-rotor) and 15.5 A for AC-4 at 400 V (plugging, inching). For resistive loads (AC-12), the maximum operating current is 10 A. At 500 V, the motor rating is 10 kW; at 690 V, it reaches 11 kW.
Side-by-side mounting is permitted with zero clearance — no derating required for adjacent units. Dimensions: 65 mm wide, 85 mm high, 91 mm deep. Main circuit terminals accept screw-type connections: solid conductors 2x (0.25 to 2.5 mm²), stranded 2x (1 to 2.5 mm²) or 2x (2.5 to 6 mm²), and up to 2x 10 mm² or 1x 8 AWG. The kit is complete with terminals and mounting hardware — no separate accessory pack needed.
For type 1 coordination (contactor may need replacement after fault), use gL/gG 63 A.