It carries a rated coil voltage of 200 to 277 V and includes an auxiliary switch for status feedback. The contactor mounts via screw fixing on a vertical surface, rotatable +/-90° or tiltable +/-22.5° front-to-back, which gives flexibility in tight enclosures.
The auxiliary contacts are rated for 10 A at 24 V, 2 A at 48 V and 60 V, 1 A at 110 V, 0.9 A at 125 V, and 0.3 A at 220 V — so the 24 V DC control circuit can handle a typical PLC output load without an interposing relay. The coil operates at 200–277 V AC/DC, making it suitable for common 240 V control transformers across 50/60 Hz lines. The contactor is rated for 800 operations per hour at AC-1 (resistive), 400/h at AC-2, 1000/h at AC-3 (motor start/run), and 130/h at AC-4 (plugging/inching). The AC-3 rate is the one that governs most conveyor and pump duty — 1000 cycles per hour means a cycle every 3.6 seconds, enough for high-speed packaging lines.
Dimensions: 172 mm high, 120 mm wide, 170 mm deep — size S6 frame. Main power terminals accept stranded wire from 16 to 70 mm². Auxiliary and coil terminals accept solid or stranded wire: 2x 0.5–1.5 mm², 2x 0.75–2.5 mm², or max 2x 0.75–4 mm². The coil has screw-type terminals.