It mounts via screw fixing on a vertical surface, rotatable ±90° and tiltable ±22.5°, giving flexibility for tight enclosure layouts. Rated control supply voltage is 200–277 V AC/DC, with a closing delay of 80–100 ms on both AC and DC. The magnet coil uses screw-type terminals for reliable field wiring. Main power conductors accept 70–240 mm² stranded copper, while auxiliary circuits take 2x 0.5–1.5 mm² solid or 2x 0.75–2.5 mm² stranded, up to 2x 4 mm². This covers most motor branch circuit and control wiring needs without adapters.
Switching frequency varies by duty: 750 ops/h for AC-1 resistive loads, 500 ops/h for AC-3 motor starting, and 130 ops/h for AC-4 plugging/inching. The AC-3e rating at 500 ops/h matches the standard AC-3 figure, confirming suitability for routine motor starting. Auxiliary contacts are rated 10 A at 24 V, 2 A at 48 V and 60 V, and 1 A at 110 V — adequate for PLC inputs, pilot lights, and interlocking relays in the control circuit. The 10–15 ms arcing time and 0.4 power factor at 50/60 Hz are standard for this frame size.
Mounting and clearance requirements
Dimensions are 210 mm high, 165 mm wide, and 202 mm deep. Single 11 mm diameter mounting hole per the screw-fixing pattern. Verify your control voltage matches the 200–277 V coil before wiring.