What this contactor is
It is rated for screw fixing onto a vertical mounting surface, rotatable ±90° or tiltable ±22.5° front-to-back.
Main circuit accepts stranded conductors from 70 to 240 mm² — sized for high-current motor or resistive loads. The auxiliary contact handles 10 A at 24 V, which covers most PLC or relay interface signals; at 110 V it drops to 1 A, so check your control voltage before wiring. Switching rates are duty-dependent: 500 operations per hour at AC-1 (resistive), 420/h at AC-3 (motor starting), and 130/h at AC-4 (plugging/reversing). The coil picks up at 1.1× rated voltage and drops out at 0.8× — a 380-420 V coil on a 400 V line will hold reliably.
Dimensions: 214 mm high, 160 mm wide, 225 mm deep. Mounts via screw fixing through 11 mm holes.
No official successor has been published. If you are cross-referencing from an older SIRIUS variant, the S12 frame size and 380-420 V coil are the key fit parameters — verify the mounting footprint and auxiliary contact arrangement against your panel layout.