The Siemens 3RT1316-1AV60 is a SIRIUS power contactor in the compact S00 frame size, built for switching motor loads and resistive circuits in control panels. It carries 4 poles in the main current circuit with 4 normally-open (NO) main contacts — a 4-pole NO configuration that suits applications needing simultaneous switching of all phases plus a neutral or an additional load circuit. Rated for AC-2 duty at 4 kW at 400 V, it handles slip-ring motor starting and other moderate-inductive loads; the AC-12 rating of 10 A covers resistive and solid-state loads in the control circuit. The 24 V coil draws its rating from the listed 10 A at 24 V, with auxiliary contact ratings scaling down at higher voltages (2 A at 60 V, 1 A at 110 V, 0.3 A at 220 V). Mechanical life is rated at 30 million typical cycles, reflecting the S00 platform's endurance for high-duty-cycle applications like conveyor lines or packaging machinery. The contactor mounts via screw and snap-on onto a 35 mm DIN rail per EN 50022, and side-by-side mounting is permitted — no derating gaps needed between units in a multi-contactor bank. Front protection is IP20, adequate for enclosed panel installation where the contactor is not exposed to dust or moisture ingress. Operating temperature spans -25 to +60 °C, with pollution degree 3 (conductive pollution or dry non-conductive that becomes conductive) — typical for industrial control environments. Maximum operating altitude is 2 000 m. The screw-type terminals accept solid and stranded conductors: 2x (0.5... 1.5 mm²), 2x (0.75... 2.5 mm²), max. 2x (0.75... 4 mm²), with AWG equivalents of 2x (20... 16), 2x (18... 14), 1x 12 for main and auxiliary circuits. Short-circuit protection coordination: Type 2 requires a gL/gG fuse rated 20 A; Type 1 requires 35 A.
Siemens 3RT1316-1AV60 SIRIUS Power Contactor, 4-Pole, 4 NO,
Siemens SIRIUS power contactor, size S00, 4-pole, 4 NO main contacts, screw terminals, snap-on DIN rail mount, 24 V coil, 4 kW AC-2 at 400 V, 10 A AC-12.
Specifications
Identification
| Parameter | Value |
|---|---|
| Contactor frame size | S00 |
Ratings & Performance
| Parameter | Value |
|---|---|
| Rated value @ 400 V | 3 A |
| Rated value @ 230 V | 6 A |
| Rated value @ 24 V | 10 A |
| Rated value @ 60 V | 2 A |
| Rated value @ 110 V | 1 A |
| Rated value @ 220 V | 0.3 A |
Control & Coil
| Parameter | Value |
|---|---|
| Control supply voltage type | AC |
Contacts & Poles
| Parameter | Value |
|---|---|
| Main poles | 4 |
| Main NO contacts | 4 |
| Auxiliary contact reliability | 1 faulty switching per 100 million (17 V, 1 mA) |
Protection & Coordination
| Parameter | Value |
|---|---|
| Short-circuit coordination type 1, fuse | fuse gL/gG: 35 A |
| Short-circuit coordination type 2, fuse | fuse gL/gG: 20 A |
| Aux. switch short-circuit protection, fuse | fuse gL/gG: 10 A |
Connection & Mounting
| Parameter | Value |
|---|---|
| Main circuit connection | screw-type terminals |
| Conductor cross-section, solid | 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²), max. 2x (0.75 ... 4 mm²) |
| Conductor cross-section, finely stranded w/ ferrule | 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²) |
| Side-by-side mounting | Yes |
Durability
| Parameter | Value |
|---|---|
| Durability (operating cycles, typ.) | 30 000 000 |
| Durability with aux. switch block (cycles, typ.) | 10 000 000 |
Environmental
| Parameter | Value |
|---|---|
| Operating temperature range | -25 ... +60 °C |
Mechanical
| Parameter | Value |
|---|---|
| Width | 45 mm |
| Height | 57.5 mm |
| Depth | 72 mm |
Product details
Frequently asked questions
What are the key ratings for the 3RT1316-1AV60?
It is a 4-pole power contactor with 4 NO main contacts, rated 4 kW at 400 V AC-2, 10 A AC-12. The coil is 24 V. Mechanical life is 30 million typical cycles. Operating temperature range is -25 to +60 °C.
Where can I buy the 3RT1316-1AV60?
This part is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — no stock count or price is listed here.
What is the depth of the 3RT1316-1AV60?
The listed depth is 72 mm, with a width of 45 mm and height of 57.5 mm — the compact S00 footprint.
What conductor sizes does the 3RT1316-1AV60 accept?
Screw terminals accept solid/stranded: 2x (0.5... 1.5 mm²), 2x (0.75... 2.5 mm²), max. 2x (0.75... 4 mm²). AWG equivalents: 2x (20... 16), 2x (18... 14), 1x 12 for main and auxiliary circuits.
Will the 3RT1316-1AV60 drop into a panel specified around the 3RT1016-1AG61?
Both are SIRIUS S00-size contactors sharing the same 45 mm width, 57.5 mm height, and DIN rail mounting footprint, so mechanical fit is the same. The 3RT1316-1AV60 has 4 poles with 4 NO contacts versus the peer's different contact arrangement — verify the circuit topology before substituting.