Skip to main content
Log in
Siemens 3RT1317-2AN60 — Contactors

Siemens SIRIUS 3RT1317-2AN60 Power Contactor, S00, 4 NO, 5.5

MPN3RT1317-2AN60

Siemens SIRIUS 3RT1317-2AN60 power contactor, size S00, 4 NO main contacts, 5.5 kW at AC-2 400 V, spring-loaded terminals, 45 mm width, current production.

Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

3RT1317-2AN60 — Identification
ParameterValue
Contactor frame sizeS00
3RT1317-2AN60 — Ratings & Performance
ParameterValue
Rated value @ 400 V3 A
Rated value @ 230 V6 A
Rated value @ 24 V10 A
Rated value @ 60 V2 A
Rated value @ 110 V1 A
Rated value @ 220 V0.3 A
3RT1317-2AN60 — Control & Coil
ParameterValue
Control supply voltage typeAC
Rated value @ 50 Hz0.85 ... 1.1
Rated value @ 50 Hz200 V
3RT1317-2AN60 — Contacts & Poles
ParameterValue
Main poles4
Main NO contacts4
Auxiliary contact reliability1 faulty switching per 100 million (17 V, 1 mA)
3RT1317-2AN60 — Protection & Coordination
ParameterValue
Short-circuit coordination type 1, fusefuse gL/gG: 35 A
Short-circuit coordination type 2, fusefuse gL/gG: 20 A
Aux. switch short-circuit protection, fusefuse gL/gG: 10 A
3RT1317-2AN60 — Connection & Mounting
ParameterValue
Main circuit connectionspring-loaded terminals
Conductor cross-section, solid2x (0.25 ... 2.5 mm²)
Conductor cross-section, finely stranded w/ ferrule2x (0.25 ... 1.5 mm²)
Side-by-side mountingYes
3RT1317-2AN60 — Durability
ParameterValue
Durability (operating cycles, typ.)30 000 000
Durability with aux. switch block (cycles, typ.)10 000 000
3RT1317-2AN60 — Environmental
ParameterValue
Operating temperature range-25 ... +60 °C
3RT1317-2AN60 — Mechanical
ParameterValue
Width45 mm
Height60 mm
Depth72 mm

Product details

What it is and what it does

The Siemens SIRIUS 3RT1317-2AN60 is a power contactor in size S00, designed for switching motor loads in control panels. It carries 4 normally-open main contacts and is rated for 5.5 kW at AC-2 duty at 400 V, meaning it handles moderate motor loads like pumps or conveyors without excessive contact wear. The main circuit uses spring-loaded terminals, accepting 2x (0.25... 2.5 mm²) solid or stranded wire — no screw torque check needed, which speeds panel wiring and reduces loose-connection callbacks.

Mounting and integration

Mounts via screw or snap-on onto a 35 mm standard mounting rail per DIN EN 50022. At 45 mm wide, it fits a standard DIN-rail footprint; side-by-side mounting is allowed, so you can gang multiple contactors without extra spacing. Front and terminal protection is IP20 — safe for finger contact inside an enclosure but not for washdown areas. Operating temperature range is -25 to +60 °C, which covers most indoor panel environments.

Frequently asked questions

What are the key ratings for this contactor?

It is a size S00 power contactor with 4 NO main contacts, rated 5.5 kW at AC-2 400 V, and a maximum operating current of 10 A at AC-12. The coil is rated for 50/60 Hz at 200 V (50 Hz) or 200–220 V (60 Hz).

What type of terminals does it use?

Spring-loaded terminals on the main circuit, accepting 2x (0.25... 2.5 mm²) solid or stranded wire, or 2x (24... 14) AWG.

Will 3RT1317-2AN60 drop into a panel that was specified around 3RT1016-2AP02 without rewiring?

Both are size S00 contactors on a 45 mm DIN-rail footprint, so the mechanical fit and rail mounting are identical. However, verify the coil voltage and auxiliary contact configuration — 3RT1317-2AN60 has 4 NO main contacts and no NC, while the peer may differ. Terminal type (spring-loaded here) matches if the peer also uses spring terminals; if the peer uses screw terminals, the wiring method changes.

MPN
3RT1317-2AN60