Its coil accepts 24–60 VAC at 50 or 60 Hz, drawing 8.5 VA at either frequency, so it fits standard control transformers without oversizing. The contactor carries two normally-open and two normally-closed instantaneous auxiliary contacts, rated for switching up to 4 A at 230 V, 3 A at 400 V, and 2 A at 690 V — covering most pilot-duty and small-load applications in a 400/690 V panel.
Mounts via screw fixing on a vertical surface; the enclosure can be rotated ±180° or tilted forward/backward ±30° at 0° rotation, giving flexibility in tight cabinets. Dimensions are 225 mm high, 184 mm wide, 180 mm deep — a substantial footprint that fits standard S12 panel cutouts.
Wiring and auxiliary contacts
The auxiliary switch block is present and can accept up to two additional attachable contact blocks for expanding signal feedback. Pickup voltage threshold is 0.8 x rated (about 19.2 VAC minimum), dropout at 1.1 x rated (about 26.4 VAC maximum) — ensures reliable pull-in and avoids chatter on a sagging control bus.