S10 frame size and what it carries
The 3RT1467-2XF46-0LA2: This is a SIRIUS size S10 contactor — the largest standard frame in the SIRIUS line, built for high-current motor switching and resistive loads up to the 600 V class. AC-3 switching capacity is 156 A at 480 V and 144 A at 600 V — that covers most 150 hp motor applications at 480 V and 125 hp at 600 V without oversizing. The body dimensions are 210 mm high by 145 mm wide by 202 mm deep, with screw fixing through two 11 mm mounting holes. It needs 10 mm clearance above and below, 20 mm forward, and 10 mm to the sides for arc-quenching and cooling.
Wiring and termination
That's enough for paralleling feed conductors or looping through to another device. The auxiliary switch block is included — you get built-in NO/NC contacts without needing a separate add-on module for basic feedback or interlocking.
DC switching capability — not just an AC contactor
That covers DC motor braking circuits, battery switching, and control transformer isolation. The coil is DC-operated with a rated control voltage of 110 V DC. Pick-up time is 80 to 100 ms, and arcing time runs 10 to 15 ms — both typical for a frame this size.
Mounting flexibility and environmental limits
Mounting position is generous: vertical surface with ±90° rotation, plus ±22.5° tilt front-to-back. That lets you fit it into angled subpanels or tight enclosures without derating. That's full industrial spec — suitable for unheated warehouses or outdoor cabinet installations.