S10 frame, 96–127 V AC/DC coil — the panel-fit anchor
The 3RT1467-6PF35: This is a Siemens SIRIUS contactor in the S10 frame size — the largest standard IEC contactor frame in the 3RT series, sized for motor loads that need the full 70–240 mm² power-wiring capacity on the main poles. The magnet coil accepts 96–127 V AC or DC, so a single part covers both a 110 V AC control transformer and a 125 V DC control bus without a coil swap — one BOM line for mixed-voltage panels.
Mounting position and clearances — no surprise in the cabinet
Screw fixing through an 11 mm hole (single hole per pole) is the fastening method — no DIN-rail clip on this frame, so the panel backplate needs drilled and tapped mounting points.
Auxiliary contact capacity — what the 24 V and 230 V ratings actually mean
At 230 V the auxiliary contact is rated 6 A — this is the same contact block, but the 230 V rating is higher than the 220 V figure because the test duty cycle differs; use the 230 V value for 240 V control circuits.
Operating environment and thermal limits
The contactor is rated for 50 Hz (0.5 s) and 60 Hz (0.8–1.1 s) short-time withstand — the 60 Hz window is wider because the magnetic circuit saturates differently at the higher frequency.