Siemens SIRIUS power contactor, size S00, 3RT1516-2AP60, 10 A at 24 V rated value, screw and snap-on DIN rail mount, spring-loaded terminals.
| Parameter | Value |
|---|---|
| Contactor frame size | S00 |
| Parameter | Value |
|---|---|
| Rated value @ 400 V | 3 A |
| Rated value @ 230 V | 6 A |
| Rated value @ 24 V | 10 A |
| Rated value @ 60 V | 2 A |
| Rated value @ 110 V | 1 A |
| Rated value @ 220 V | 0.3 A |
| Parameter | Value |
|---|---|
| Control supply voltage type | AC |
| Rated value @ 50 Hz | 5.1 V·A |
| Rated value @ 50 Hz | 220 V |
| Parameter | Value |
|---|---|
| Main poles | 4 |
| Main NO contacts | 2 |
| Auxiliary contact reliability | 1 faulty switching per 100 million (17 V, 1 mA) |
| Parameter | Value |
|---|---|
| Short-circuit coordination type 1, fuse | fuse gL/gG: 35 A |
| Short-circuit coordination type 2, fuse | fuse gL/gG: 20 A |
| Aux. switch short-circuit protection, fuse | fuse gL/gG: 10 A |
| Parameter | Value |
|---|---|
| Main circuit connection | spring-loaded terminals |
| Conductor cross-section, solid | 2x (0.25 ... 2.5 mm²) |
| Conductor cross-section, finely stranded w/ ferrule | 2x (0.25 ... 1.5 mm²) |
| Side-by-side mounting | Yes |
| Parameter | Value |
|---|---|
| Durability (operating cycles, typ.) | 30 000 000 |
| Durability with aux. switch block (cycles, typ.) | 10 000 000 |
| Parameter | Value |
|---|---|
| Operating temperature range | -25 ... +60 °C |
| Storage temperature range | -55 ... +80 °C |
| Parameter | Value |
|---|---|
| Width | 45 mm |
| Height | 60 mm |
| Depth | 72 mm |
| Parameter | Value |
|---|---|
| At AC | 4 ... 30 ms |
The main current circuit uses spring-loaded terminals, accepting 2x (0.25 to 2.5 mm²) solid or stranded conductors. The contactor is 45 mm wide, 60 mm high, and 72 mm deep.
The spring-loaded terminals and S00 footprint make it a direct fit for panels originally specified with the 3RT1016-2AP02, provided the coil voltage and auxiliary contact configuration match — the physical envelope and mounting rail are identical.
Yes, both are size S00 contactors with the same 45 mm width and snap-on DIN rail mounting per DIN EN 50022. The physical fit is identical, but verify the coil voltage and auxiliary contact configuration match your BOM.
The contactor is 45 mm wide, 60 mm high, and 72 mm deep.
The main current circuit uses spring-loaded terminals that accept 2x (0.25 to 2.5 mm²) solid or stranded conductors.
No related articles