It snaps onto a 35 mm DIN rail per DIN EN 50022 and uses spring-loaded terminals accepting 2x (0.25 to 2.5 mm²) solid or stranded wire — no screwdriver needed for termination.
DC switching profile
Rated DC-1 switching current drops with voltage: 10 A at 24 V, 2 A at 60 V, 1 A at 110 V, 0.3 A at 220 V. The arcing time spans 7 to 15 ms depending on load inductance — plan for a snubber if switching motor brakes or solenoid valves at the higher voltage end.
Panel fit
Footprint is 45 mm wide, 60 mm tall, 72 mm deep. The IP20 finger-safe terminals and front face keep it clean inside a standard enclosure.
