Its 24 VDC coil draws 10 A at rated voltage, so the coil-holding current is what you budget for in your 24 VDC supply — not the main contact rating. Main circuit termination uses spring-loaded terminals, accepting 2x (0.25... 2.5 mm²) solid or stranded wire. That means no screw-torque checks on the line — just strip to 8 mm and push in.
The mounting position is flexible: vertical surface with +/-180° rotation, or +/-30° tilt front-to-back. That covers most panel layouts — upright, rotated 90°, or tilted in a sloped enclosure. Dimensions are 45 mm wide, 60 mm high, 72 mm deep. At 45 mm, it occupies a single 45 mm DIN-rail module width — standard for size S00 contactors.