It carries a 24 VAC coil rated at 5.1 VA at 50 Hz and draws 0.27 A at 60 Hz, with a pickup operating range of 0.8 to 1.1 times the rated voltage. The main contacts are rated for 6 kV impulse withstand voltage, and the auxiliary contacts — one NO and one NC — each handle 12 A continuously.
The 45 mm width and 57.5 mm height fit the S00 footprint, leaving 6 mm clearance required at the side for heat dissipation. Side-by-side mounting is permitted, so multiple contactors can pack tightly on the rail. The IP20 finger-safe enclosure and IP20 terminal shrouds mean the unit is safe for open-panel installation where incidental contact is possible.
Switching capacity and duty
Switching capacity varies by voltage and load type. At 24 V the contactor handles 10 A; at 230 V it switches 6 A; at 400 V it is rated for 3 A. For DC loads, the ratings drop to 2 A at 60 V, 1 A at 110 V, 0.8 A at 440 V, and 0.3 A at 220 V — typical for a contactor this size. The AC-1 maximum mechanical switching rate is 1,000 operations per hour, with an arcing time of 10 to 15 ms and a dropout time of 4 to 30 ms.