Siemens SIRIUS power contactor, size S00, 24 VAC coil, 10 A rated current, spring-loaded terminals, screw and snap-on mounting on 35 mm DIN rail.
| Parameter | Value |
|---|---|
| Contactor frame size | S00 |
| Parameter | Value |
|---|---|
| Rated value @ 400 V | 3 A |
| Rated value @ 230 V | 6 A |
| Rated value @ 24 V | 10 A |
| Rated value @ 60 V | 2 A |
| Rated value @ 110 V | 1 A |
| Rated value @ 220 V | 0.3 A |
| Parameter | Value |
|---|---|
| Control supply voltage type | AC |
| Rated value @ 50 Hz | 5.1 V·A |
| Rated value @ 50 Hz | 100 V |
| Parameter | Value |
|---|---|
| Main poles | 4 |
| Main NO contacts | 2 |
| Auxiliary contact reliability | 1 faulty switching per 100 million (17 V, 1 mA) |
| Parameter | Value |
|---|---|
| Short-circuit coordination type 1, fuse | fuse gL/gG: 35 A |
| Short-circuit coordination type 2, fuse | fuse gL/gG: 20 A |
| Aux. switch short-circuit protection, fuse | fuse gL/gG: 10 A |
| Parameter | Value |
|---|---|
| Main circuit connection | spring-loaded terminals |
| Conductor cross-section, solid | 2x (0.25 ... 2.5 mm²) |
| Conductor cross-section, finely stranded w/ ferrule | 2x (0.25 ... 1.5 mm²) |
| Side-by-side mounting | Yes |
| Parameter | Value |
|---|---|
| Durability (operating cycles, typ.) | 30 000 000 |
| Durability with aux. switch block (cycles, typ.) | 10 000 000 |
| Parameter | Value |
|---|---|
| Operating temperature range | -25 ... +60 °C |
| Storage temperature range | -55 ... +80 °C |
| Parameter | Value |
|---|---|
| Width | 45 mm |
| Height | 60 mm |
| Depth | 72 mm |
| Parameter | Value |
|---|---|
| At AC | 4 ... 30 ms |
It's built for switching motor loads and resistive loads in control panels, with a 24 VAC coil that pulls in at 50 Hz drawing 5.1 VA and at 60 Hz drawing a power factor of 0.27.
The main circuit uses spring-loaded terminals accepting 2x (0.25 to 2.5 mm²) solid or stranded wire.
Width is 45 mm, height 60 mm, depth 72 mm. It mounts on 35 mm DIN rail with side-by-side mounting allowed, needing 6 mm side clearance.
The main circuit terminals accept 2x (0.25 to 2.5 mm²) solid or stranded wire.
No related articles