The contactor's coil is rated for 24 VDC, with a switching frequency in AC-1 duty up to 1 000 operations per hour. Auxiliary contacts (both NO and NC) are rated 20 A each. The main circuit impulse withstand voltage is 6 kV. Dimensions: 85 mm high, 61 mm wide, 101 mm deep — that 61 mm width is the key number for DIN-rail space planning in a crowded panel.
Mounting and wiring detail
Side-by-side mounting is allowed — no gap needed between contactors on the rail, which saves panel width. The screw terminals for the main circuit are sized for solid or stranded wire: 2x (0.5–1.5 mm²), 2x (0.75–2.5 mm²), max 2x (0.75–4 mm²). That covers most control wiring gauges used in industrial panels. Maximum altitude for operation is 2 000 m, so it works at most plant sites without derating.