The kit is complete: the contactor body ships with the terminal hardware for the main and auxiliary circuits — no separate accessory pack needed for a standard install.
Dimensions are 71 mm wide, 85 mm tall, and 101 mm deep — the S0 frame fits standard 35 mm DIN rail enclosures.
Each NO and NC auxiliary contact is rated 20 A continuous. The main circuit handles impulse withstand at 6 kV. Switching frequencies reach 1 000 cycles per hour at AC-1 maximum. For DC switching at 24 V, the maximum permissible current is 0.016 A — this is a signal-level rating, not for power DC loads. The contactor is built for AC motor and resistive loads; the DC curve drops sharply as voltage rises.