The Siemens SIRIUS 3RT1924-5AP01 is a magnet coil for Size S0 contactors, rated 230 V AC at 50 Hz with an operating tolerance of 0.8 to 1.1 times the rated voltage. This is the replacement coil you'd swap into a 3RT1 or 3RT2 Size S0 contactor when the original coil fails or the control voltage needs to match a 230 V AC 50 Hz supply.
Panel Integration
The coil mounts onto the Size S0 contactor via the standard screw-terminal interface. No DIN-rail space consumed — it's a component that lives on the contactor itself. The screw terminals accept the same wire gauges as the contactor's control circuit, typically 0.5 to 2.5 mm² solid or stranded with ferrule. If you're replacing a failed coil in an existing panel, the swap is a screwdriver job: remove the four coil-terminal screws, lift the old coil off the contactor magnet stack, and press the new one into place.