Siemens SIRIUS power contactor, size S00, 3RT2015-2AF04, 24 VDC coil, 45 mm wide, spring-type terminals, screw and snap-on mounting onto 35 mm DIN rail.
| Parameter | Value |
|---|---|
| Contactor frame size | S00 |
| Parameter | Value |
|---|---|
| Rated operational current, AC-12, max. | 10 A |
| Rated operational current, AC-4 @ 400 V | 6.5 A |
| Rated value @ 400 V | 3 A |
| Rated value @ 500 V | 2 A |
| Rated value @ 690 V | 1 A |
| Rated value @ 230 V | 0.75 hp |
| Rated value @ 24 V | 6 A |
| Rated value @ 60 V | 2 A |
| Rated value @ 110 V | 1 A |
| Rated value @ 220 V | 0.3 A |
| Parameter | Value |
|---|---|
| Control supply voltage type | AC |
| Rated value @ 50 Hz | 0.25 |
| Rated value @ 50 Hz | 110 V |
| Parameter | Value |
|---|---|
| Main poles | 3 |
| Main NO contacts | 3 |
| Auxiliary contact reliability | 1 faulty switching per 100 million (17 V, 1 mA) |
| Parameter | Value |
|---|---|
| Short-circuit coordination type 1, fuse | gG: 35A (690V,100kA), aM: 20A (690V,100kA), BS88: 35A (415V,80kA) |
| Short-circuit coordination type 2, fuse | gG: 20A (690V,100kA), aM: 16A (690V, 100kA), BS88: 20A (415V, 80kA) |
| Aux. switch short-circuit protection, fuse | gG: 10 A (500 V, 1 kA) |
| Parameter | Value |
|---|---|
| Main circuit connection | spring-loaded terminals |
| Aux. / control circuit connection | spring-loaded terminals |
| Conductor cross-section, solid | 0.5 ... 4 mm² |
| Conductor cross-section, solid or stranded | 2x (0,5 ... 4 mm²) |
| Conductor cross-section, finely stranded w/ ferrule | 2x (0.5 ... 2.5 mm²) |
| Mounting method | screw and snap-on mounting onto 35 mm DIN rail according to DIN EN 60715 |
| Side-by-side mounting | Yes |
| Parameter | Value |
|---|---|
| Durability (operating cycles, typ.) | 10 000 000 |
| Durability with aux. switch block (cycles, typ.) | 10 000 000 |
| Parameter | Value |
|---|---|
| Operating temperature range | -25 ... +60 °C |
| Storage temperature range | -55 ... +80 °C |
| Installation altitude, max. | 2 000 m |
| Parameter | Value |
|---|---|
| Width | 45 mm |
| Height | 70 mm |
| Depth | 121 mm |
| Parameter | Value |
|---|---|
| At AC | 4 ... 15 ms |
At 45 mm wide and 70 mm high, it fits the standard S00 footprint. Depth is 121 mm — watch the gland plate clearance if you're packing relays behind it.
The AC-3 maximum is 750 operations per hour, and AC-4 drops to 250 per hour — that's the heavy inching/jogging limit. Arcing time runs 10 to 15 ms. The 24 VDC coil draws 6 A at rated value; at 48 V it's 2 A. These numbers tell you the contactor is sized for moderate-duty motor switching, not continuous resistive loads at full nameplate.
The depth is 121 mm.
The spring-type terminals accept solid or stranded wire from 0.5 to 4 mm².
This part is sourced to order against an RFQ through independent distribution; availability and current pricing are confirmed at quote time.
The 3RT2015-2AF04 shares the same S00 frame and DIN-rail footprint as the 3RT2015-2AP02, so it fits the same panel cutout and rail spacing. The difference is the coil voltage — 24 VDC here versus the 2AP02's coil — so verify your control voltage before swapping.
No related articles