Skip to main content
Log in
Siemens 3RT2015-4AN62 — Contactors

Siemens 3RT2015-4AN62 SIRIUS Power Contactor, 24 VDC 10 A, S

MPN3RT2015-4AN62

Siemens SIRIUS power contactor, size S00, 3RT2015-4AN62, 24 VDC coil rated 10 A, 480 VAC rated 4.8 A, screw and snap-on DIN rail mounting.

Siemens 3RT2015-4AN62 datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

3RT2015-4AN62 — Identification
ParameterValue
Contactor frame sizeS00
3RT2015-4AN62 — Ratings & Performance
ParameterValue
Rated operational current, AC-12, max.10 A
Rated operational current, AC-4 @ 400 V6.5 A
Rated value @ 400 V3 A
Rated value @ 500 V2 A
Rated value @ 690 V1 A
Rated value @ 230 V0.75 hp
Rated value @ 24 V10 A
Rated value @ 60 V2 A
Rated value @ 110 V1 A
Rated value @ 220 V0.3 A
3RT2015-4AN62 — Control & Coil
ParameterValue
Control supply voltage typeAC
Rated value @ 50 Hz0.24
Rated value @ 50 Hz200 V
3RT2015-4AN62 — Contacts & Poles
ParameterValue
Main poles3
Main NO contacts3
Auxiliary contact reliability1 faulty switching per 100 million (17 V, 1 mA)
3RT2015-4AN62 — Protection & Coordination
ParameterValue
Short-circuit coordination type 1, fusegG: 35A (690V,100kA), aM: 20A (690V,100kA), BS88: 35A (415V,80kA)
Short-circuit coordination type 2, fusegG: 20A (690V,100kA), aM: 16A (690V, 100kA), BS88: 20A (415V, 80kA)
Aux. switch short-circuit protection, fusegG: 10 A (500 V, 1 kA)
3RT2015-4AN62 — Connection & Mounting
ParameterValue
Main circuit connectionRing cable lug connection
Aux. / control circuit connectionring terminal lug connection
Mounting methodscrew and snap-on mounting onto 35 mm DIN rail according to DIN EN 60715
Side-by-side mountingYes
3RT2015-4AN62 — Durability
ParameterValue
Durability (operating cycles, typ.)30 000 000
Durability with aux. switch block (cycles, typ.)10 000 000
3RT2015-4AN62 — Environmental
ParameterValue
Operating temperature range-25 ... +60 °C
Storage temperature range-55 ... +80 °C
Installation altitude, max.2 000 m
3RT2015-4AN62 — Mechanical
ParameterValue
Width45 mm
Height58 mm
Depth73 mm
3RT2015-4AN62 — Specifications
ParameterValue
At AC4 ... 15 ms

Product details

Coil pulls 24 VDC at 10 A rated; on the 480 VAC side it carries 4.8 A. That 24 VDC pickup is the one you spec for a PLC-driven output — holds down to about 18 V before dropout, typical for this class.

That 45 mm width is a standard module slot — one TE (17.5 mm) would be tight; this is a 2.5-TE-wide device. Arcing time runs 10–15 ms at AC; switching frequencies range from 250 ops/h at AC-4 up to 1000 ops/h at AC-1. The magnet coil termination uses a ring cable lug connection — keep a ring terminal crimper in the van; a fork or pin terminal won't seat right.

Frequently asked questions

Will 3RT2015-4AN62 drop into a panel that was specified around 3RT2015-4AP62 without rewiring?

It shares the same S00 frame, same coil voltage, and same DIN-rail footprint, so it fits the same panel cutout and rail. The auxiliary contact arrangement differs between the two order codes, so verify your control wiring before swapping.

Where can I buy 3RT2015-4AN62?

This part is sourced and quoted to order against an RFQ through independent distribution; availability and current pricing are confirmed at quote time.

MPN
3RT2015-4AN62