The S00 frame size limits the main contact current to the AC-3 duty curve typical of this class — the contactor is sized for small motor loads up to roughly 7 A at 400 V AC-3 (the exact motor rating depends on the specific load). The auxiliary contact is rated at 10 A at 24 V, 2 A at 48 V, and 1 A at 110 V, so it can directly pilot a PLC input or a small relay without an interposing device. Wire range accepts 0.5 to 4 mm² solid or stranded, and up to 2x 4 mm² for paralleled conductors — enough for the control circuit and main power wiring in a standard motor starter. The screw-type coil terminals are field-serviceable with a common screwdriver; no special crimp tool required.
Siemens 3RT2016-1AN62 SIRIUS S00 Power Contactor, 45 mm wide
MPN3RT2016-1AN62
Active
Siemens SIRIUS 3RT2016-1AN62, S00 power contactor, 45 mm width, screw-type coil terminals, auxiliary switch, 73 mm depth.
$96.81Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026
Specifications
| Parameter | Value |
|---|---|
| Contactor frame size | S00 |
| Parameter | Value |
|---|---|
| Rated operational current, AC-12, max. | 10 A |
| Rated operational current, AC-4 @ 400 V | 8.5 A |
| Rated value @ 400 V | 3 A |
| Rated value @ 500 V | 2 A |
| Rated value @ 690 V | 1 A |
| Rated value @ 230 V | 1 hp |
| Rated value @ 24 V | 10 A |
| Rated value @ 60 V | 2 A |
| Rated value @ 110 V | 1 A |
| Rated value @ 220 V | 0.3 A |
| Parameter | Value |
|---|---|
| Control supply voltage type | AC |
| Rated value @ 50 Hz | 0.24 |
| Rated value @ 50 Hz | 200 V |
| Parameter | Value |
|---|---|
| Main poles | 3 |
| Main NO contacts | 3 |
| Auxiliary contact reliability | 1 faulty switching per 100 million (17 V, 1 mA) |
| Parameter | Value |
|---|---|
| Short-circuit coordination type 1, fuse | gG: 35A (690V,100kA), aM: 20A (690V,100kA), BS88: 35A (415V,80kA) |
| Short-circuit coordination type 2, fuse | gG: 20A (690V,100kA), aM: 16A (690V, 100kA), BS88: 20A (415V, 80kA) |
| Aux. switch short-circuit protection, fuse | gG: 10 A (500 V, 1 kA) |
| Parameter | Value |
|---|---|
| Main circuit connection | screw-type terminals |
| Aux. / control circuit connection | screw-type terminals |
| Conductor cross-section, solid | 0.5 ... 4 mm² |
| Conductor cross-section, solid or stranded | 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²), 2x 4 mm² |
| Conductor cross-section, finely stranded w/ ferrule | 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²) |
| Mounting method | screw and snap-on mounting onto 35 mm DIN rail according to DIN EN 60715 |
| Side-by-side mounting | Yes |
| Parameter | Value |
|---|---|
| Durability (operating cycles, typ.) | 30 000 000 |
| Durability with aux. switch block (cycles, typ.) | 10 000 000 |
| Parameter | Value |
|---|---|
| Operating temperature range | -25 ... +60 °C |
| Storage temperature range | -55 ... +80 °C |
| Installation altitude, max. | 2 000 m |
| Parameter | Value |
|---|---|
| Width | 45 mm |
| Height | 58 mm |
| Depth | 73 mm |
| Parameter | Value |
|---|---|
| At AC | 4 ... 15 ms |
Product details
Frequently asked questions
What is the depth of the 3RT2016-1AN62?
73 mm. That is the dimension from the DIN rail mounting surface to the front of the contactor enclosure.
What wire sizes does the 3RT2016-1AN62 accept?
Solid or stranded wire from 0.5 to 4 mm². For the main contacts, it also accepts 2x 0.5 to 1.5 mm², 2x 0.75 to 2.5 mm², or 2x 4 mm².
Does the 3RT2016-1AN62 include an auxiliary switch?
Yes, it comes with an integrated auxiliary switch as standard. The auxiliary contact is rated at 10 A at 24 V, 2 A at 48 V, and 1 A at 110 V.
MPN
3RT2016-1AN62