It mounts via screw and snap-on onto 35 mm DIN rail per DIN EN 60715, with a ±180° rotation possible on vertical surfaces and ±22.5° tilt forward/backward, so panel layout is flexible even in tight enclosures.
Dimensions and wiring
At 45 mm wide, 58 mm tall, and 73 mm deep, this contactor fits standard S00 panel cutouts. The main and auxiliary circuits accept solid or stranded wire from 0.5 to 4 mm², with dual-wire capacity for 2x (0.5...1.5 mm²), 2x (0.75...2.5 mm²), or 2x 4 mm² — useful when looping through terminals without a separate junction.
Auxiliary contact ratings and switching frequency
The integrated auxiliary switch is rated 10 A at 24 V, 2 A at 48/60 V, 1 A at 110 V, 0.9 A at 125 V, 0.3 A at 220 V, 3 A at 400 V, and 0.2 A at 440 V — covering control voltages from 24 VDC up to 440 VAC. Maximum mechanical switching frequency is 1 000 cycles/hour under AC-1 load, 750 cycles/hour under AC-2/AC-3/AC-3e, and 250 cycles/hour under AC-4, so duty-cycle planning should match the load category.