That helps when you're squeezing it into a crowded panel. Dimensions are 70 mm high, 45 mm wide, 73 mm deep.
Termination & Wiring
Main contact terminals accept solid or stranded wire from 0.5 to 4 mm², with a 2x (0.5 to 4 mm²) capacity for paralleling conductors. The coil connection uses spring-type terminals — no screwdriver needed for the magnet coil, which speeds up panel wiring. Keep those minimums for arc flash and heat dissipation, especially at higher switching frequencies.
Switching Performance & Ratings
Rated for AC-3 duty (motor switching) at 750 operating cycles per hour maximum, and AC-1 (resistive) at 1,000 cycles/h. AC-4 (plugging/reversing) drops to 250 cycles/h. Arcing time runs 10 to 15 ms at AC. Motor horsepower rating: 1 hp at 230 V. For DC switching, the ratings are 10 A at 24 V, dropping to 0.2 A at 440 V — that's typical for a contactor this size; don't expect it to handle heavy DC loads.