It switches motor loads in control panels and industrial machinery, with a 24 VDC rating of 10 A.
The 24 VDC coil pulls in reliably at 10 A, but the contactor also carries rated switching currents at higher voltages: 2 A at 48 VDC, 2 A at 60 VDC, 1 A at 110 VDC, 0.9 A at 125 VDC, 0.3 A at 220 VDC, 3 A at 400 VDC, and 0.2 A at 440 VDC. At 230 VAC it is rated for 1 hp motor load. These numbers define the DC load curve — the contactor can handle moderate DC switching, but the current drops sharply as voltage rises, typical for a contactor sized for AC motor duty. Spring-type terminals accept solid or stranded wire from 0.5 to 4 mm², and can take two conductors of the same range (2x 0.5...4 mm²). That is a clean, tool-less termination — no screwdriver needed for the power circuit, which speeds up panel wiring.
The contactor measures 45 mm wide, 70 mm tall, and 73 mm deep.