Siemens SIRIUS 3RT2016-2BG41 power contactor, size S00, 24 VDC coil, spring-type terminals, 10 A at 24 VDC, 3 A at 400 VAC.
| Parameter | Value |
|---|---|
| Contactor frame size | S00 |
| Parameter | Value |
|---|---|
| Rated operational current, AC-12, max. | 10 A |
| Rated operational current, AC-4 @ 400 V | 8.5 A |
| Rated value @ 400 V | 3 A |
| Rated value @ 500 V | 2 A |
| Rated value @ 690 V | 1 A |
| Rated value @ 230 V | 1 hp |
| Rated value @ 24 V | 10 A |
| Rated value @ 60 V | 2 A |
| Rated value @ 110 V | 1 A |
| Rated value @ 220 V | 0.3 A |
| Parameter | Value |
|---|---|
| Control supply voltage type | DC |
| Parameter | Value |
|---|---|
| Main poles | 3 |
| Main NO contacts | 3 |
| Auxiliary contact reliability | 1 faulty switching per 100 million (17 V, 1 mA) |
| Parameter | Value |
|---|---|
| Short-circuit coordination type 1, fuse | gG: 35A (690V,100kA), aM: 20A (690V,100kA), BS88: 35A (415V,80kA) |
| Short-circuit coordination type 2, fuse | gG: 20A (690V,100kA), aM: 16A (690V, 100kA), BS88: 20A (415V, 80kA) |
| Aux. switch short-circuit protection, fuse | gG: 10 A (500 V, 1 kA) |
| Parameter | Value |
|---|---|
| Main circuit connection | spring-loaded terminals |
| Aux. / control circuit connection | spring-loaded terminals |
| Conductor cross-section, solid | 0.5 ... 4 mm² |
| Conductor cross-section, solid or stranded | 2x (0,5 ... 4 mm²) |
| Conductor cross-section, finely stranded w/ ferrule | 2x (0.5 ... 2.5 mm²) |
| Mounting method | screw and snap-on mounting onto 35 mm standard mounting rail according to DIN EN 60715 |
| Side-by-side mounting | Yes |
| Parameter | Value |
|---|---|
| Durability (operating cycles, typ.) | 30 000 000 |
| Durability with aux. switch block (cycles, typ.) | 10 000 000 |
| Parameter | Value |
|---|---|
| Operating temperature range | -25 ... +60 °C |
| Storage temperature range | -55 ... +80 °C |
| Installation altitude, max. | 2 000 m |
| Parameter | Value |
|---|---|
| Width | 45 mm |
| Height | 70 mm |
| Depth | 73 mm |
Rated at 10 A at 24 VDC and 3 A at 400 VAC, this contactor handles typical small motor and lighting circuits. The AC-3 switching frequency maxes at 750 operations per hour, so it keeps up with moderate cycling on conveyors or pumps without derating.
The 45 mm wide footprint (73 mm deep, 70 mm tall) fits standard panel layouts. The built-in auxiliary switch saves a separate add-on for status feedback to the PLC.
The 24 VDC coil draws 10 A at rated voltage. At 400 VAC the contact rating is 3 A. AC-3 switching frequency max is 750 operations per hour. Spring-type terminals accept 0.5 to 4 mm² solid or stranded wire.
Size S00 frame: 45 mm wide, 73 mm deep, 70 mm tall. Snaps onto 35 mm DIN rail per DIN EN 60715 or can be screw-mounted. Clearance: 10 mm up/down/forward, 6 mm at sides.
Yes, the contactor comes with a built-in auxiliary switch, eliminating the need for a separate add-on block for basic status feedback.
No related articles