SIRIUS S00 power contactor — 3RT2016-4AG61
The S00 frame size keeps the footprint compact at 45 mm wide, 58 mm tall, and 73 mm deep — a space-saving fit for high-density panel layouts where every DIN rail slot counts.
The auxiliary contact is rated for switching at multiple voltage levels: 10 A at 24 V, 2 A at 48 V and 60 V, 1 A at 110 V, 0.9 A at 125 V, 0.3 A at 220 V, 3 A at 400 V, 0.2 A at 440 V, 7.6 A at 480 V, and 2 A at 500 V. Switching frequency limits vary by duty class: 1,000 operations per hour at AC-1 (resistive loads), 750 ops/h at AC-2 and AC-3 (motor starting/running), and 250 ops/h at AC-4 (plugging/inching). For a conveyor line cycling every 5 seconds, the AC-3 limit of 750 ops/h means the contactor can handle about one start every 4.8 seconds — match your application cycle time against this ceiling. The 10 mm clearance required upwards, forwards, and downwards, plus 6 mm at the sides, dictates the minimum spacing to adjacent components in the enclosure for proper arc quenching and heat dissipation. The coil connection uses a ring cable lug — factor that into your wiring harness design if your panel standard specifies fork or pin terminals.
With the S00 size and 45 mm width, this contactor occupies one standard DIN-rail module position. Plan for the 10 mm clearance above and below when laying out wire ducts and terminal blocks.