S00 Frame, 45 mm Wide — Fits Tight Panels
The 3RT2017-1AP61 is a SIRIUS size S00 contactor, 45 mm wide by 58 mm tall and 73 mm deep — it slides into a crowded DIN-rail section without forcing a bigger enclosure. Mounting position is forgiving: ±180° rotation on a vertical surface, plus ±22.5° tilt forward or backward. That matters when you're shoehorning contactors behind a gland plate or around a cable duct — you're not locked into one orientation.
Switching Duty and Mechanical Life
This contactor is rated for 750 operations per hour in AC-3 and AC-3e duty, 750 in AC-2, and 250 in AC-4. The mechanical life is 30 million operations typical — that's a decade-plus of daily cycling in a conveyor or pump starter before the contacts wear. The arcing time runs 10 to 15 ms, with a switching time of 4 to 15 ms at AC, so it clears fast enough to protect downstream loads without nuisance tripping. It carries a built-in auxiliary switch — one less add-on to order and wire, which keeps the BOM clean and the panel layout simpler.
Wiring and Temperature Range
Terminals accept solid wire from 0.5 to 4 mm² and stranded from 0.5 to 4 mm², plus dual-wire combinations like 2x 0.5...1.5 mm² or 2x 4 mm². The magnet coil uses screw-type terminals — no special crimp tool needed, just a standard screwdriver. Operating temperature is -25 to +60 °C, storage from -55 to +80 °C, so it handles unheated warehouses and panel summer heat without derating.
Auxiliary Contact Ratings Across Voltages
The auxiliary contacts are rated 10 A at 24 V, 2 A at 48 V and 60 V, 1 A at 110 V, 0.9 A at 125 V, 0.3 A at 220 V, and 3 A at 400 V. That covers most control-voltage standards you'll find in a panel — 24 VDC PLC outputs, 110 VAC relay coils, or 400 VAC pilot devices. The coil power draw is 0.24 VA at both 50 Hz and 60 Hz, so the PLC output driving it doesn't see a heavy load.