SIRIUS Size S00 Power Contactor, 48 VDC Coil
It mounts on 35 mm DIN rail per DIN EN 60715 via screw or snap-on fastening, and can be rotated ±180° on a vertical surface or tilted ±22.5° forward/backward — useful for tight enclosures where access is limited. The coil is rated for 48 VDC, with screw-type terminals for the magnet coil.
For DC switching, the contactor is rated at 10 A at 24 V, 2 A at 48 V, 2 A at 60 V, 1 A at 110 V, 0.9 A at 125 V, 0.3 A at 220 V, and 3 A at 400 V — these are the currents it can break at those voltages, so match them to your DC load's inrush and steady-state draw. Maximum operating cycles per hour vary by duty: 1,000 at AC-1 (resistive), 750 at AC-2 and AC-3 (motor starting/running), 750 at AC-3e (enhanced motor), and 250 at AC-4 (plugging/reversing).
Mounting and Wiring Clearances
The contactor measures 45 mm wide, 73 mm deep, and 58 mm high. Solid or stranded wire from 0.5 to 4 mm² is accepted; two conductors per terminal are allowed (2x 0.5–1.5 mm², 2x 0.75–2.5 mm², or 2x 4 mm²).