The 24 VDC coil with spring-type terminals means it's a fit for PLC-driven panels where you want fast wiring without screwdriver work — just strip and push. Rated at 10 A for the 24 VDC auxiliary circuit, it handles typical PLC output switching without issue. The contactor switches up to 1 000 cycles per hour in AC-1 duty (resistive loads) and 750 cycles per hour in AC-3 (motor) duty, so it's sized for moderate cycling — conveyor sections, pump starters, fan control.
At 45 mm wide, it takes one standard module slot in the panel. Wire range accepts 0.5 to 4 mm² solid or stranded, or 2x (0.5 to 4 mm²) for looping through. Keep that in mind when laying out the DIN rail — you need those gaps for arc venting and heat dissipation.