It carries a 24 VDC coil and spring-type terminals for the coil connection, which speeds wiring on the line. Rated operational current sits at 10 A at 24 V, with stepped ratings across higher voltages — 2 A at 48 V, 2 A at 60 V, 1 A at 110 V, 0.9 A at 125 V, 0.3 A at 220 V, 3 A at 400 V, and 0.2 A at 440 V. That covers the common control-voltage range for a size S00 contactor. Switching frequency is rated per duty cycle: up to 1 000 operations per hour at AC-1 (resistive), 750/h at AC-2 and AC-3 (motor start/run), and 250/h at AC-4 (plugging/inching). That keeps takt time predictable for a high-cycle line — the AC-3 rate holds 750 cycles/hour without derating.
Dimensions are 73 mm deep, 45 mm wide, 70 mm high — the 45 mm width is the standard S00 footprint, leaving room for adjacent devices.
The coil uses spring-type terminals — no screw tightening needed, which cuts wiring time on a multi-contactor panel. Auxiliary contacts are included (range 20…12), so you get built-in feedback or interlocking without an add-on block.