Skip to main content
Log in
Siemens 3RT2017-2AP01-ZW96 — Contactors

Siemens SIRIUS 3RT2017-2AP01-ZW96 Power Contactor, Size S00,

MPN3RT2017-2AP01-ZW96
Active

Siemens SIRIUS 3RT2017-2AP01-ZW96 power contactor, size S00, 24 VDC coil, spring-type terminals, screw and snap-on 35 mm DIN rail mounting.

Siemens 3RT2017-2AP01-ZW96 datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

3RT2017-2AP01-ZW96 — Identification
ParameterValue
Contactor frame sizeS00
3RT2017-2AP01-ZW96 — Ratings & Performance
ParameterValue
Rated operational current, AC-12, max.10 A
Rated operational current, AC-4 @ 400 V8.5 A
Rated value @ 400 V3 A
Rated value @ 500 V2 A
Rated value @ 690 V1 A
Rated value @ 230 V2 hp
Rated value @ 24 V10 A
Rated value @ 60 V2 A
Rated value @ 110 V1 A
Rated value @ 220 V0.3 A
3RT2017-2AP01-ZW96 — Control & Coil
ParameterValue
Control supply voltage typeAC
Rated value @ 50 Hz0.25
Rated value @ 50 Hz230 V
3RT2017-2AP01-ZW96 — Contacts & Poles
ParameterValue
Main poles3
Main NO contacts3
Auxiliary contact reliability1 faulty switching per 100 million (17 V, 1 mA)
3RT2017-2AP01-ZW96 — Protection & Coordination
ParameterValue
Short-circuit coordination type 1, fusegG: 50A (690V,100kA), aM: 20A (690V,100kA), BS88: 35A (415V,80kA)
Short-circuit coordination type 2, fusegG: 20A (690V,100kA), aM: 16A (690V, 100kA), BS88: 20A (415V, 80kA)
Aux. switch short-circuit protection, fusegG: 10 A (500 V, 1 kA)
3RT2017-2AP01-ZW96 — Connection & Mounting
ParameterValue
Main circuit connectionspring-loaded terminals
Aux. / control circuit connectionspring-loaded terminals
Conductor cross-section, solid0.5 ... 4 mm²
Conductor cross-section, solid or stranded2x (0,5 ... 4 mm²)
Conductor cross-section, finely stranded w/ ferrule2x (0.5 ... 2.5 mm²)
Mounting methodscrew and snap-on mounting onto 35 mm standard mounting rail according to DIN EN 60715
Side-by-side mountingYes
3RT2017-2AP01-ZW96 — Durability
ParameterValue
Durability (operating cycles, typ.)30 000 000
Durability with aux. switch block (cycles, typ.)10 000 000
3RT2017-2AP01-ZW96 — Environmental
ParameterValue
Operating temperature range-25 ... +60 °C
Storage temperature range-55 ... +80 °C
Installation altitude, max.2 000 m
3RT2017-2AP01-ZW96 — Mechanical
ParameterValue
Width45 mm
Height70 mm
Depth73 mm
3RT2017-2AP01-ZW96 — Specifications
ParameterValue
At AC7 ... 13 ms

Product details

The 3RT2017-2AP01-ZW96: The contactor is rated for AC-3 maximum switching frequency of 750 operations per hour, which governs motor switching duty — typical for conveyor, pump, and fan loads. At AC-4 (plugging/reversing) the maximum drops to 250 ops/h, reflecting the higher electrical wear from inrush during reversal. For AC-1 resistive loads, it handles up to 1,000 ops/h.

Size S00 footprint: 45 mm wide, 70 mm high, 73 mm deep. Clearances required: 10 mm upward, downward, and forward; 6 mm at the sides. Spring-type terminals on the coil speed wiring — strip, insert, done.

Frequently asked questions

What is the closest functional second-source to this contactor?

The 3RT2024-2BB40 is a peer in the same SIRIUS family but has a different coil voltage and terminal configuration. It does not drop in without verifying coil voltage and wiring — the 3RT2017-2AP01-ZW96 uses a 24 VDC coil with spring-type terminals, while the 3RT2024-2BB40 differs. Check the coil rating before substituting.

What wire sizes does the spring terminal accept?

Solid or stranded wire from 0.5 to 4 mm², and up to 2x (0.5 to 4 mm²) per terminal for paralleling conductors.

MPN
3RT2017-2AP01-ZW96