The Size S00 frame keeps the contactor footprint tight — 73 mm deep, 45 mm wide, 70 mm tall — so it fits densely packed DIN-rail assemblies without crowding adjacent devices. The spring-type coil terminals accept solid or stranded wire from 0.5 to 4 mm², and the same gauge range applies to the main contact wiring (2x 0.5 to 4 mm² per terminal). This means you can land standard 14–10 AWG control wiring without lug adapters. Switching frequency limits are specified per duty class: AC-1 (resistive) allows up to 1,000 cycles/hour, AC-2 and AC-3 (motor starting/running) cap at 750 cycles/hour, and AC-4 (plugging/reversing) drops to 250 cycles/hour. For a conveyor drive cycling every 5 seconds, the AC-3 rate is adequate; for a rapid-reversing application like a tapping machine, the AC-4 limit governs the real duty cycle. The contactor operates across -25 to +60 °C ambient and can be mounted in any orientation within ±180° rotation and ±22.5° tilt on a vertical surface.
The spring-type terminals for the coil and main contacts reduce wiring time compared to screw-clamp variants — no torque driver needed, just strip to 8–10 mm and insert. Arcing time is 10 to 15 ms at AC, and the mechanical life of the contactor is rated at 30,000,000 typical operations — meaning the coil and armature assembly will outlast the electrical contact wear in most motor-switching applications.