It carries a 24 VDC coil and spring-type terminals for tool-free wiring of solid or stranded conductors from 0.5 to 4 mm², with dual-wire capacity up to 2x (0.5... 4 mm²) per clamp. The contactor mounts via screw or snap-on onto 35 mm DIN rail per DIN EN 60715, fitting a 45 mm wide footprint with 73 mm depth and 70 mm height.
This contactor is rated for AC-3 and AC-3e motor switching at up to 750 operating cycles per hour, and AC-4 inching/plugging duty at up to 250 cycles/h. AC-1 resistive loads allow up to 1,000 cycles/h. The main contacts are rated for a range of 20 to 12 A — the exact value depends on the load type and voltage; for motor starting (AC-3), the 12 A end of that range is the practical limit. Auxiliary contacts are built in, rated at 10 A at 24 V, 2 A at 48 V, 2 A at 60 V, 1 A at 110 V, 0.9 A at 125 V, 0.3 A at 220 V, 3 A at 400 V, and 0.2 A at 440 V.
Environmental Limits and Mounting Flexibility
Mechanical service life is typical 30 million operations.