Skip to main content
Siemens 3RT2017-4KB42-0LA0 — Contactors

Siemens 3RT2017-4KB42-0LA0 SIRIUS Contactor, 24 VDC

MPN3RT2017-4KB42-0LA0

Siemens SIRIUS 3RT2017-4KB42-0LA0 contactor, size S00, 24 VDC coil, extended operating range, screw and snap-on 35 mm DIN rail mount, 45 mm width.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

3RT2017-4KB42-0LA0 — Identification
ParameterValue
Contactor frame sizeS00
3RT2017-4KB42-0LA0 — Ratings & Performance
ParameterValue
Rated operational current, AC-12, max.10 A
Rated operational current, AC-4 @ 400 V8.5 A
Rated value @ 400 V3 A
Rated value @ 500 V2 A
Rated value @ 690 V1 A
Rated value @ 230 V2 hp
Rated value @ 24 V10 A
Rated value @ 60 V2 A
Rated value @ 110 V1 A
Rated value @ 220 V0.3 A
3RT2017-4KB42-0LA0 — Control & Coil
ParameterValue
Control supply voltage typeDC
3RT2017-4KB42-0LA0 — Contacts & Poles
ParameterValue
Main poles3
Main NO contacts3
3RT2017-4KB42-0LA0 — Protection & Coordination
ParameterValue
Short-circuit coordination type 1, fusegG: 50A (690V,100kA), aM: 20A (690V,100kA), BS88: 35A (415V,80kA)
Short-circuit coordination type 2, fusegG: 20A (690V,100kA), aM: 16A (690V, 100kA), BS88: 20A (415V, 80kA)
Aux. switch short-circuit protection, fusegG: 10 A (500 V, 1 kA)
3RT2017-4KB42-0LA0 — Connection & Mounting
ParameterValue
Main circuit connectionRing cable lug connection
Aux. / control circuit connectionring terminal lug connection
Conductor cross-section, solid2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²), 2x 4 mm²
Mounting methodscrew and snap-on mounting onto 35 mm standard mounting rail according to DIN EN 60715
Side-by-side mountingYes
3RT2017-4KB42-0LA0 — Durability
ParameterValue
Durability (operating cycles, typ.)30 000 000
Durability with aux. switch block (cycles, typ.)10 000 000
3RT2017-4KB42-0LA0 — Environmental
ParameterValue
Operating temperature range-40 ... +70 °C
Storage temperature range-55 ... +80 °C
Installation altitude, max.2 000 m
3RT2017-4KB42-0LA0 — Mechanical
ParameterValue
Width45 mm
Height61 mm
Depth117 mm

Product details

Size S00 contactor with extended operating range

The 3RT2017-4KB42-0LA0: The 'extended operating range' design means the coil holds in reliably even when the control voltage dips well below nominal — a practical advantage on long cable runs or shared DC supplies where voltage drop is a concern. It's fitted with a 24 VDC coil terminated via a ring cable lug connection — not a screw terminal on the coil, so factor in the lug type when wiring the control circuit.

Panel fit and mounting clearances

The 45 mm width, 61 mm height, and 117 mm depth define the panel footprint. This covers most panel layouts without derating.

DC switching capability across voltages

DC switching ratings are given per voltage level — a key detail for DC load circuits where arc extinction is harder than AC. For AC-4 duty (frequent reversing or inching), the maximum switching rate is 250 operations per hour — above that the contactor's thermal capacity limits the duty cycle.

Temperature range and mechanical endurance

Typical mechanical life is 30,000,000 cycles — this is the mechanical endurance before wear, not the electrical endurance under load. Electrical life will be lower and depends on the switching current and voltage.

Sourced through independent distribution channels — quoted to order against the BOM quantity. No stock-holding claim; each order is fulfilled from verified supply.

Frequently asked questions

What are the DC switching ratings at different voltages?

These are DC resistive load ratings — inductive loads require derating.

What clearance is needed around this contactor in a panel?

The side clearance is the tightest — adjacent components can sit 6 mm away.

MPN
3RT2017-4KB42-0LA0