Siemens SIRIUS power contactor, size S00, 3RT2018-4BB42, 24 VDC coil, screw and snap-on DIN rail mount, auxiliary switch included.
| Parameter | Value |
|---|---|
| Contactor frame size | S00 |
| Parameter | Value |
|---|---|
| Rated operational current, AC-12, max. | 10 A |
| Rated operational current, AC-4 @ 400 V | 11.5 A |
| Rated value @ 400 V | 3 A |
| Rated value @ 500 V | 2 A |
| Rated value @ 690 V | 1 A |
| Rated value @ 230 V | 2 hp |
| Rated value @ 24 V | 10 A |
| Rated value @ 60 V | 2 A |
| Rated value @ 110 V | 1 A |
| Rated value @ 220 V | 0.3 A |
| Parameter | Value |
|---|---|
| Control supply voltage type | DC |
| Parameter | Value |
|---|---|
| Main poles | 3 |
| Main NO contacts | 3 |
| Auxiliary contact reliability | 1 faulty switching per 100 million (17 V, 1 mA) |
| Parameter | Value |
|---|---|
| Short-circuit coordination type 1, fuse | gG: 50A (690V,100kA), aM: 25A (690V,100kA), BS88: 50A (415V,80kA) |
| Short-circuit coordination type 2, fuse | gG: 25A (690V,100kA), aM: 20A (690V,100kA), BS88: 25A (415V,80kA) |
| Aux. switch short-circuit protection, fuse | gG: 10 A (500 V, 1 kA) |
| Parameter | Value |
|---|---|
| Main circuit connection | Ring cable lug connection |
| Aux. / control circuit connection | ring terminal lug connection |
| Mounting method | screw and snap-on mounting onto 35 mm DIN rail according to DIN EN 60715 |
| Side-by-side mounting | Yes |
| Parameter | Value |
|---|---|
| Durability (operating cycles, typ.) | 30 000 000 |
| Durability with aux. switch block (cycles, typ.) | 10 000 000 |
| Parameter | Value |
|---|---|
| Operating temperature range | -25 ... +60 °C |
| Storage temperature range | -55 ... +80 °C |
| Installation altitude, max. | 2 000 m |
| Parameter | Value |
|---|---|
| Width | 45 mm |
| Height | 58 mm |
| Depth | 73 mm |
It carries a 24 VDC coil and includes an auxiliary switch, so you get feedback or interlock without adding a separate block. Rated for 10 A at 24 VDC, 14 A at 480 V, and 11 A at 600 V, this contactor handles typical motor and heater circuits within those voltage bands. The AC-3 switching frequency maxes at 750 operations per hour, which is fine for most conveyor and pump duty cycles.
That helps when you're squeezing it into a crowded sub-panel or retrofitting an existing layout.
It's a size S00 power contactor with a 24 VDC coil, rated 10 A at 24 V, 14 A at 480 V, and 11 A at 600 V. Auxiliary switch included. AC-3 switching frequency up to 750 operations per hour.
Screw or snap-on mount on 35 mm DIN rail per DIN EN 60715. Clearances: 10 mm upwards, forwards, and downwards; 6 mm at the side. Dimensions: 45 mm wide, 58 mm tall, 73 mm deep.
No related articles