It snaps onto a 35 mm DIN rail per DIN EN 60715 or screws down, and it's rated for 1,000 switching cycles per hour at AC-1 duty — that's where it handles resistive loads at full rated current without derating. The coil connection uses spring-type terminals, so you're not cranking down screws on a ladder.
At 45 mm wide and 102 mm tall, this S0 contactor fits a standard 8-inch panel depth with room for a finger-safe cover.
Wire it up
Coil terminals are spring-cage; strip 10 mm and push in. Clearance to adjacent devices: 10 mm above and below, 6 mm to the side.