Siemens SIRIUS power contactor, size S0, 24 VDC coil, spring-type terminals, 45 mm wide, 97 mm depth, current lifecycle stage.
| Parameter | Value |
|---|---|
| Contactor frame size | S0 |
| Parameter | Value |
|---|---|
| Rated operational current, AC-12, max. | 10 A |
| Rated operational current, AC-4 @ 400 V | 8.5 A |
| Rated value @ 400 V | 3 A |
| Rated value @ 500 V | 2 A |
| Rated value @ 690 V | 1 A |
| Rated value @ 230 V | 1 hp |
| Rated value @ 24 V | 10 A |
| Rated value @ 60 V | 2 A |
| Rated value @ 110 V | 1 A |
| Rated value @ 220 V | 0.3 A |
| Parameter | Value |
|---|---|
| Control supply voltage type | AC |
| Rated value @ 50 Hz | 0.25 |
| Rated value @ 50 Hz | 400 V |
| Parameter | Value |
|---|---|
| Main poles | 3 |
| Main NO contacts | 3 |
| Auxiliary contact reliability | 1 faulty switching per 100 million (17 V, 1 mA) |
| Parameter | Value |
|---|---|
| Short-circuit coordination type 1, fuse | gG: 63A (690V,100kA), aM: 32A (690V,100kA), BS88: 63A (415V,80kA) |
| Short-circuit coordination type 2, fuse | gG: 25A (690V,100kA), aM: 20A (690V,100kA), BS88: 25A (415V,80kA) |
| Aux. switch short-circuit protection, fuse | gG: 10 A (500 V, 1 kA) |
| Parameter | Value |
|---|---|
| Main circuit connection | spring-loaded terminals |
| Aux. / control circuit connection | spring-loaded terminals |
| Conductor cross-section, solid | 1 ... 10 mm² |
| Conductor cross-section, solid or stranded | 2x (0.5 ... 2.5 mm²) |
| Conductor cross-section, finely stranded w/ ferrule | 2x (0.5 ... 1.5 mm²) |
| Mounting method | screw and snap-on mounting onto 35 mm standard mounting rail according to DIN EN 60715 |
| Side-by-side mounting | Yes |
| Parameter | Value |
|---|---|
| Durability (operating cycles, typ.) | 10 000 000 |
| Durability with aux. switch block (cycles, typ.) | 10 000 000 |
| Parameter | Value |
|---|---|
| Operating temperature range | -25 ... +60 °C |
| Storage temperature range | -55 ... +80 °C |
| Installation altitude, max. | 2 000 m |
| Parameter | Value |
|---|---|
| Width | 45 mm |
| Height | 102 mm |
| Depth | 97 mm |
| Parameter | Value |
|---|---|
| At AC | 4 ... 16 ms |
Rated for AC-1, AC-2, AC-3, and AC-3e duty at 1 000 switching cycles per hour maximum, with AC-4 limited to 300 cycles per hour due to the heavier electrical wear of plugging or inching loads.
The S0 frame accepts main contact sizes 18 to 8 AWG (solid or stranded 1 to 10 mm²) and auxiliary wiring 2x (0.5 to 2.5 mm²). Clearances: 10 mm upwards, downwards, and forwards; 6 mm at the side. Arcing time is 10 ms at 50 Hz.
The depth is 97 mm, with a width of 45 mm and height of 102 mm.
Solid or stranded wire from 1 to 10 mm² for main contacts, and 2x (0.5 to 2.5 mm²) for auxiliary wiring.
It is sourced and quoted to order against an RFQ through independent distribution, with availability and current pricing confirmed at quote time.
Both are SIRIUS S0 frame contactors with the same 45 mm width and DIN-rail mounting, so they share the same panel footprint and rail spacing. The main difference is the coil voltage and terminal type; verify the 24 VDC coil and spring terminals match your control voltage and wiring preference before substituting.
No related articles