Siemens SIRIUS power contactor, 3RT2025-4AP60, size S0, 45 mm width, 97 mm depth, screw and snap-on DIN rail mounting.
| Parameter | Value |
|---|---|
| Contactor frame size | S0 |
| Parameter | Value |
|---|---|
| Rated operational current, AC-12, max. | 10 A |
| Rated operational current, AC-4 @ 400 V | 15.5 A |
| Rated value @ 400 V | 3 A |
| Rated value @ 500 V | 2 A |
| Rated value @ 690 V | 1 A |
| Rated value @ 230 V | 3 hp |
| Rated value @ 24 V | 10 A |
| Rated value @ 60 V | 2 A |
| Rated value @ 110 V | 1 A |
| Rated value @ 220 V | 0.3 A |
| Parameter | Value |
|---|---|
| Control supply voltage type | AC |
| Rated value @ 50 Hz | 0.25 |
| Rated value @ 50 Hz | 220 V |
| Parameter | Value |
|---|---|
| Main poles | 3 |
| Main NO contacts | 3 |
| Auxiliary contact reliability | 1 faulty switching per 100 million (17 V, 1 mA) |
| Parameter | Value |
|---|---|
| Short-circuit coordination type 1, fuse | gG: 63A (690V,100kA), aM: 32A (690V,100kA), BS88: 63A (415V,80kA) |
| Short-circuit coordination type 2, fuse | gG: 25A (690V,100kA), aM: 20A (690V,100kA), BS88: 25A (415V,80kA) |
| Aux. switch short-circuit protection, fuse | gG: 10 A (500 V, 1 kA) |
| Parameter | Value |
|---|---|
| Main circuit connection | Ring cable lug connection |
| Aux. / control circuit connection | ring terminal lug connection |
| Mounting method | screw and snap-on mounting onto 35 mm standard mounting rail according to DIN EN 60715 |
| Side-by-side mounting | Yes |
| Parameter | Value |
|---|---|
| Durability (operating cycles, typ.) | 10 000 000 |
| Durability with aux. switch block (cycles, typ.) | 10 000 000 |
| Parameter | Value |
|---|---|
| Operating temperature range | -25 ... +60 °C |
| Storage temperature range | -55 ... +80 °C |
| Installation altitude, max. | 2 000 m |
| Parameter | Value |
|---|---|
| Width | 45 mm |
| Height | 85 mm |
| Depth | 97 mm |
| Parameter | Value |
|---|---|
| At AC | 4 ... 16 ms |
The Siemens SIRIUS power contactor 3RT2025-4AP60 is a size S0 unit, 45 mm wide and 97 mm deep, designed for screw and snap-on mounting onto 35 mm DIN rail per DIN EN 60715.
Fastens via screw or snaps onto 35 mm standard mounting rail, with mounting position flexibility: ±180° rotation on a vertical surface and ±22.5° tilt forward/backward. Clearance requirements: 10 mm upwards, 10 mm forwards, 10 mm downwards, 6 mm at the side.
The contactor is 45 mm wide, 85 mm high, and 97 mm deep. Clearances required: 10 mm upwards, 10 mm forwards, 10 mm downwards, and 6 mm at the side.
It supports screw mounting or snap-on onto 35 mm DIN rail per DIN EN 60715. The mounting position allows ±180° rotation on a vertical surface and ±22.5° tilt forward/backward.
No related articles